主持

国家级海外高层次青年人才计划，隧道结构混凝土3D打印，2024

上海市海外高层次人才计划，土木工程，2024

同济大学青年百人计划A类，2024

苏黎世联邦理工学院博士后研究基金（ETH Postdoc Fellowship），低碳3D打印混凝土静态混合系统的数字孪生，2023-2025

根特大学博士后专项研究基金(BOF Postdoc Fellowship)，用于数字混凝土硬化调控的磁控微胶囊，2023-2025

欧盟地平线EXCITE基金第二期（EU Horizon），双管泵送3D打印混凝土骨料的空间分布，2023

欧盟地平线EXCITE基金第四期（EU Horizon），基于全域定向排列的3D打印混凝土性能增强，2024

根特大学工业研究基金（IOF），3D打印混凝土的按需双料配合比设计，2023-2025

参与

国家重点研发计划，“新奥法”隧道工程的集约化升级及城市高质量发展示范应用，2021-2023

同济大学全球重点合作伙伴培育计划专项，3D打印混凝土数字孪生基础理论与应用，2024-2025

瑞士创新基金（Innosuisse），预制承重柱的3D混凝土打印，2023-2025

根特大学工业研究基金（IOF），用于3D打印混凝土硬化调控的双管泵送系统，2022-2023

根特大学专项研究基金（BOF），应对3D打印混凝土互斥冲突的挑战，2018-2021

论文

发表SCI论文60余篇，含中科院一区顶级期刊30余篇。代表性论文如下：

[1]        Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Kim VanTittelboom, Yong Yuan, Geert De Schutter. Stiffening controllable concretemodified with redispersible polymer powder for twin-pipe printing. Cement and ConcreteResearch, 2022, 161: 106953.

[2]        Yaxin Tao, A.V. Rahul, Karel Lesage, Yong Yuan, KimVan Tittelboom, Geert De Schutter*. Stiffening control of cement-basedmaterials using accelerators in inline mixing processes: Possibilities andchallenges. Cement and Concrete Composites, 2021, 119: 103972.

[3]        Yaxin Tao, Gieljan Vantyghem, Karel Lesage, Yong Yuan,Wouter De Corte, Kim Van Tittelboom, Geert De Schutter*. Adhesion properties ofprintable polymer-modified concrete for rock tunnel linings. ACI Materials Journal, 2021, 118 (6): 61-73.

[4]        Yaxin Tao, A.V. Rahul, Karel Lesage, Kim VanTittelboom ,Yong Yuan, Geert De Schutter*. Mechanical and microstructuralproperties of 3D printable concrete in the context of the twin-pipe pumpingstrategy. Cement and Concrete Composites, 2022, 125:104324.

[5]        Yaxin Tao, Karel Lesage, Kim Van Tittelboom*, YongYuan, Geert De Schutter. Influence of substrate surface roughness and moisturecontent on adhesion performance of 3D printable concrete. Cement and ConcreteComposites, 2022, 126: 104350.

[6]        Yaxin Tao, Karel Lesage, Kim Van Tittelboom, Yong Yuan*,Geert De Schutter*. Influence of aluminum sulfate on mobility and adhesion ofhydroxyethyl methyl cellulose in cement-based materials for tunnel linings. Cement and ConcreteComposites, 2022, 131: 104594.

[7]        Yaxin Tao*, Qiang Ren, Karel Lesage, Kim VanTittelboom, Yong Yuan, Geert De Schutter. Shape stability of printable concretewith river and manufactured sand characterized by squeeze flow, Cementand Concrete Composites, 2022, 133: 104674.

[8]        Yaxin Tao*, A.V. Rahul, Manu K. Mohan, Kim VanTittelboom, Yong Yuan, Geert De Schutter. Blending performance of helicalstatic mixer used for twin-pipe 3D concrete printing. Cement and ConcreteComposites, 2022, 134: 104741.

[9]        Qiang Ren, YaxinTao, Dengwu Jiao, Zhengwu Jiang*, Geert De Schutter*. Rheologicalproperties of concrete with manufactured sand: A multi-level prediction. Cement and ConcreteComposites, 2022, 133: 134647.

[10]    Manu K. Mohan,A. V. Rahul, Yaxin Tao, Geert De Schutter, Kim Van Tittelboom*.Hydration re-initiation of borated CSA systems with a two-stage mixing process:An application in extrusion-based concrete 3D printing. Cement and ConcreteResearch, 2022, 159: 106870.

[11]    Yubo Sun, Shizhe Zhang, A.V. Rahul, Yaxin Tao,Filip Van Bockstaele, Koen Dewettinck, Guang Ye, Geert De Schutter*. Rheology of alkali-activated slag pastes: Newinsight from microstructural investigations by cryo-SEM. Cement and ConcreteResearch, 2022, 157: 106806.

[12]    Yaxin Tao, Karel Lesage, Kim Van Tittelboom*, YongYuan, Geert De Schutter. Twin-pipe pumping strategy for stiffening control of3D printable concrete: From transportation to fabrication. Cement and ConcreteResearch, 2023, 168: 107137.

[13]    Yaxin Tao, Qiang Ren, Gieljan Vantyghem, Karel Lesage,Kim Van Tittelboom*, Yong Yuan, Wouter De Corte, Geert De Schutter. Extending3D concrete printing to hard rock tunnel linings: Adhesion of freshcementitious materials for different surface inclinations. Automation inConstruction, 2023, 149: 104787.

[14]    Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert DeSchutter, Kim Van Tittelboom. Development of a calcium sulfoaluminate-Portlandcement binary system for twin-pipe 3D concrete printing. Cement and ConcreteComposites, 2023, 138: 104960.

[15]    Yaxin Tao*, A.V. Rahul, Manu K. Mohan, Geert DeSchutter, Kim Van Tittelboom. Recent progress and technical challenges in usingcalcium sulfoaluminate (CSA) cement. Cement and ConcreteComposites, 2023, 137: 104908.

[16]    Yaxin Tao, Xiaodi Dai*, Geert De Schutter, Kim VanTittelboom. Set-on-demand of alkali-activated slag mixture using twin-pipepumping. Construction and Building Materials, 2023, 392: 132003.

[17]    Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert DeSchutter, Kim Van Tittelboom. Influence of rheology on mixing homogeneity andmechanical behavior of twin-pipe 3D printable concrete. Construction andBuilding Materials, 2023, 408: 133694.

[18]    Xiaodi Dai, YaxinTao*, Kim Van Tittelboom, Geert De Schutter. Rheological and mechanicalproperties of 3D printable alkali-activated cements. Cement and ConcreteComposites, 2023, 139: 104995.

[19]    Yiyuan Zhang, Yaxin Tao, Yubo Sun, Kim VanTittelboom, Yi Zhang, Karel Lesage, Geert De Schutter*. Active control of thixotropy ofmagneto-responsive cementitious materials with the intervention of time-varyingmagnetic fields. Cement and Concrete Research, 2024, 181: 107520.

[20]    Timothy Wangler,Yaxin Tao, Arnesh Das, Matineh Mahmoudi, Seyma Gurel, Robert J. Flatt*. Aluminate2K systems in digital concrete: Process, design, chemistry, and outlook. Cement and ConcreteResearch, 2024, 185: 107644.

[21]     Yubo Sun, Manu K. Mohan,Yaxin Tao, Yi Zhang, Kim Van Tittelboom, Guang Ye, Geert De Schutter*. A conceptual design of two-streamalkali-activated materials. Cement and Concrete Composites, 2024,148: 105485.

[22]    Yi Zhang, QiangRen, Xiaodi Dai, Yaxin Tao, Yiyuan Zhang, Zhengwu Jiang*, Kim VanTittelboom*, Geert De Schutter*. A potential active rheology control approachfor 3D printable cement-based materials: Coupling of temperature and viscositymodifiers. Cement and Concrete Composites, 2024, 149: 105496.

[23]    Yiyuan Zhang, Karel Lesage, Yi Zhang, Yaxin Tao,Kim Van Tittelboom, Geert De Schutter*. Acomparison of magneto-responsive particles and testing protocols for activerheology control of cementitious materials. Cement and ConcreteComposites, 2024, 146: 105390.

[24]    Yong Yuan, Xiaoyun Wang, Jiaolong Zhang*, Yaxin Tao,Kim Van Tittelboom, Luc Taerwe, Geert De Schutter*. The shear strength of the interface betweenartificial rock and printed concrete at super-early ages. Frontiers of Structuraland Civil Engineering, 2024, 18: 51-65.

[25]    Yaxin Tao*, Yi Zhang, Xiaoyun Wang, Geert De Schutter,Kim Van Tittelboom. Adhesion evaluation and interface characterization of 3Dprinted concrete for automatic repair. Construction andBuilding Materials, 2024, 414: 134952.

[26]    Yaxin Tao*, Manu K. Mohan, A.V. Rahul, Geert DeSchutter, Kim Van Tittelboom. Hydration and microstructure of calciumsulfoaluminate-Portland cement binder systems for set-on-demand applications. Materials and Structures, 2024, 57: 35.

[27]    Yaxin Tao*, Jiangang Zhou, Weijiu Cui, Xinyu Shi, Geert DeSchutter, Kim Van Tittelboom. Numericalassessment of plastic yielding in extrusion-based 3D concrete printing. Materials and Structures, 2024, 57: 65.

[28]    Yaxin Tao, Xiaodi Dai*, Geert De Schutter, Kim VanTittelboom. Adhesion performance of alkali-activated material for 3D printingof tunnel linings at different temperatures. Frontiers of Structuraland Civil Engineering, 2024, 18: 66-79.

[29]    Xiaodi Dai, YaxinTao*, Yi Zhang, Luchuan Ding, Kim Van Tittelboom, Geert De Schutter. Developmentof 3D printable alkali-activated slag-metakaolin concrete. Construction andBuilding Materials, 2024, 444: 137775.

[30]    Weijiu Cui, Haijun Sun, Jiangang Zhou, Sheng Wang, XinyuShi, Yaxin Tao*. Geometricquality evaluation of 3D printable concrete using computational fluid dynamics.Frontiers ofStructural and Civil Engineering, 2024, 18: 963-976.

[31]     Weijiu Cui, Liang Shen,Dongsheng Ji, Wenliang Liu, Tianheng Wang, Dongshuai Hou, Wenkai Shen, XinyuShi, Yaxin Tao*. Mechanicalperformance and permeability of low-carbon printable concrete. Journal ofSustainable Cement-based Materials, 2024, 14(3), 406–416.

[32]    Yubo Sun, XinyueZhang, Jiangang Zhou, Yilin Wang, Bo Zhang, Yiyuan Zhang, Weijiu Cui*, YaxinTao*. Extrudability analysis of 3D printable concrete as a two-phasediscrete flow. Journal of Building Engineering, 2024, 98: 111252.

[33]     Weijiu Cui, WenliangLiu, Ruyi Guo, Da Wan, Xiaona Yu, Luchuan Ding, Yaxin Tao*. Geometrical quality inspection in 3D concreteprinting using AI-assisted computer vision. Materials and Structures, 2025, 58: 68.

[34]     Yiyuan Zhang, YaxinTao, Jose R.A. Godinho, Kim Van Tittelboom, Karel Lesage, Geert De Schutter*.Active rheology control of cementitiousmaterials: New insights from magneto-responsive aggregates. Cement and ConcreteResearch, 2025, 189: 107707.

[35]     Yi Zhang, Yaxin Tao,Jose R.A. Godinho, Qiang Ren, Zhengwu Jiang*, Kim Van Tittelboom*, Geert DeSchutter*. Layer interface characteristics andadhesion of 3D printed cement-based materials exposed to post-printingtemperature disturbance. Cement and Concrete Composites, 2025, 155: 105837.

[36]     Yiyuan Zhang, Yi Zhang, YaxinTao, Xiaodi Dai, Kim Van Tittelboom, Karel Lesage, Geert De Schutter*. Active rheology control of cementitiousmaterials containing hard magnetic particles: Sustained response after magneticintervention. Cement and Concrete Composites, 2025, 160: 106024.

专利

Method for layer-by-layer deposition of concrete（美国发明专利）

Method for layer-by-layer deposition of concrete usingrapidly hydrating cementitious material and bicomponent cementitious bindercomposition（美国发明专利）

一种实现预拌混合的混凝土3D打印喷头（实用新型专利）

一种带有微波养护功能的混凝土3D打印设备（实用新型专利）

参编标准

国家标准《建筑增材制造 鉴定原则 结构和基础设施要素》