个人信息
Personal Information
联系方式
Contact Information
个人简介
Personal Profile
曲寿江，同济大学材料科学与工程学院副教授/博士生导师，长期从事TiAl、Ti2AlNb基合金制备、精密热成型、增材制造钛基合金微观组织与力学性能表征等方面的课题，在TiAl、Ti2AlNb基合金成分设计、强韧化机制、相变机理、微观组织性能调控、高温氧化、塑性变形机理等方面积累了丰富的经验。先后主持10余项包括国家自然基金面上项目、预先研究项目等方面的课题，作为核心成员参与国家科技重大专项课题、国家自然科学基金(联合重点基金)等项目，负责研制500吨精密等温锻造及热成型设备，该设备的研制突破了TiAl基合金航空发动机压气机叶片成型难题，实现了难变形材料的精密热成型，取得了重要的研究成果，具有完备的数据库和专利知识产权，近年来在ActaMater、ScriptaMater、JMater Sci Tech等国际著名期刊上发表学术论文60余篇。
主持科研项目：
1、国家自然科学基金(面上)基金：“TiAl基合金在动态气氛下的高温氧化机理研究”，项目编号：51871168，项目起止：2019.01-2022.12.
2、领域基金与基础预研项目，项目起止：2019.09-2023.12.
3、横向课题：“轻质高强Ti2AlNb基合金应用研究”，项目起止：2019.08-2020.08.
4、同济大学重点科研项目培养基金：“航空航天领域典型高温结构部件制备研究”，项目起止：2015.06-2016.12.
主持科研项目：
1、国家自然科学基金(面上)基金：“TiAl基合金在动态气氛下的高温氧化机理研究”，项目编号：51871168，项目起止：2019.01-2022.12.
2、领域基金与基础预研项目，项目起止：2019.09-2023.12.
3、横向课题：“轻质高强Ti2AlNb基合金应用研究”，项目起止：2019.08-2020.08.
4、同济大学重点科研项目培养基金：“航空航天领域典型高温结构部件制备研究”，项目起止：2015.06-2016.12.
代表性论文与著作：
[1] X.R.Guan, Q. Chen, S.J. Qu*, G.J. Cao,H. Wang*, A.H. Feng, D.L. Chen*.Adiabatic shear instability in a titanium alloy: Extreme deformation-inducedphase transformation, nanotwinning and grain refinement. J. Mater. Sci. Technol.150 (2023) 104-113.
[2] Z.J.Yu, Z. Chen, D.D. Qu, S.J. Qu, H. Wang*, F. Zhao, C.Q. Zhang, A.H. Feng,D.L. Chen*. Microstructure and electrochemical behavior of a 3D-printedTi-6Al-4V alloy. Materials. 15 (2022) 4473.
[3] C.Li, J.L. Sun, A.H. Feng*, H. Wang, X.Y. Zhang, C.Q. Zhang, F. Zhao, G.J. Cao, S.J.Qu, D.L. Chen*. Active slip mode analysis of an additively manufacturedTi-6Al-4V alloy via in-grain misorientation axis distribution. Metals.12 (2022) 532.
[4] J.Chen, Q. Chen, S.J. Qu*, H.P. Xiang, C. Wang, J.B. Gao, A.H. Feng, D.L. Chen*. Oxidationmechanisms of an intermetallic alloy at high temperatures. Scripta Materialia.199 (2021) 113852.
[5] Y.L.Zhang, Z. Chen, S.J. Qu*, A.H. Feng,G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Multiple a sub-variants and anisotropicmechanical properties of an additively-manufactured Ti-6Al-4V alloy, J.Mater. Sci. Technol. 70 (2021) 113-124.
[6] Y.L.Zhang, Z. Chen, S.J. Qu*, A.H. Feng,G.B. Mi, J. Shen, X. Huang, D.L. Chen*. Cyclic deformation behavior of a3D-printed Ti-6Al-4V alloy. J. Alloys Compd. 825 (2020)153971.
[7] Y.L.Zhang, A.H. Feng*, S.J. Qu, J. Shen,D.L. Chen*. Microstructure and low cycle fatigue of a Ti2AlNb-basedlightweight alloy. J. Mater. Sci. Technol. 44, (2020) 140-147.
[8] Z.G.Zhang, S.J. Qu*, G.R. Cui*, A.H.Feng, J. Shen, D.L. Chen*. A new mechanism of dynamic phase transformations inan isothermal forged beta-gamma intermetallic alloy. Materials. 12(2019) 2787.
[9] G.D.Wu, G.R. Cui, S.J. Qu*, A.H. Feng,G.J. Cao, B.H. Ge, H.P. Xiang, J. Shen, D.L. Chen*. High-temperature oxidationmechanisms of nano-/submicro-scale lamellar structures in an intermetallicalloy. Scripta Materialia. 171 (2019) 102-107.
[10] C.K.Yan, G.R. Cui*, S.J. Qu, A.H. Feng,J. Shen, D.L. Chen. Static recrystallization of pure titanium aftercryo-deformation. Journal of Physics: Conference Series. IOP pubishing,1270 (2019) 012040.
[11] K.Zhu, S.J. Qu, A.H. Feng*, J.L. Sun,J. Shen. Microstructural evolution and refinement mechanism of a beta-gammaTiAl-based alloy during multidirectional isothermal forging. Materials.12 (2019) 2496.
[12] Y.J.Wu, A.H. Feng*, S.J. Qu, X. Hu, J.Shen. Macro-microscopic field evolution of Ti6Al4V alloy during isothermalupsetting based on deform platform. Materials Research Express. 6(2019) 056505.
[13] Z.X.Zhang, S.J. Qu*, A.H. Feng, X. Hu,J. Shen. Microstructural mechanisms during multidirectional isothermal forgingof as-cast Ti-6Al-4V alloy with an initial lamellar microstructure. J.Alloys Compd. 713 (2019) 277-287.
[14] 朱凯，冯艾寒，曲寿江，沈军，铸态Ti-44Al-4Nb-(Mo,Cr,B)合金的热变形行为及热加工图，有色金属工程，9(9) (2019) 34-39.
[15] 闫辰侃，曲寿江，冯艾寒，沈军，钛及钛合金形变孪晶的研究进展，稀有金属，43(5) (2019) 449-460. (Cover page ofthe journal issue)
[16] S.J. Qu, A.H. Feng*, M.R. Shagiev, H.Xie, B.B. Li, J. Shen. Superplastic behavior of the fine-grainedTi-21Al-18Nb-1Mo-2V-0.3Si intermetallic alloy. Letters on Materilals.8 (4s), (2018) 567-571.
[17] J.M.Xiang, G.B. Mi, S.J. Qu*, X. Huang,Z. Chen, A.H. Feng, J. Shen, D.L. Chen**. Thermodynamic and microstructuralstudy of Ti2AlNb oxides at 800oC. Scientific Reports.8 (2018) 1276.
[18] K.Zhu, S.J. Qu, A.H. Feng, J.L. Sun,J. Shen*. Evolution of the microstructure and lamellar orientation of abeta-solidifying gamma-TiAl-based alloy during hot compression. Metals.8 (2018) 445.
[19] C.K.Yan, A.H. Feng*, S.J. Qu, J.L. Sun,J. Shen. Hot deformation and grain refinement mechanisms of commercially puretitanium processed via three-directional cryo-compression. Mater. Sci. Eng. A731 (2018) 266-277.
[20] C.K.Yan, A.H. Feng*, S.J. Qu, G.J. Cao,J.L. Sun, J. Shen, D.L. Chen**. Dynamic recrystallization of titanium: Effectof pre-activated twinning at cryogenic temperature. Acta Mater. 154(2018) 311-324.
[21] Z.X.Zhang, S.J. Qu, A.H. Feng, X. Hu, J.Shen*. The low strain rate response of as-cast Ti-6Al-4V alloy with an initialcoarse lamellar structure. Metals. 8 (2018) 270-1-13.
[22] S.J. Qu*, S.Q. Tang, A.H. Feng, C. Feng,J. Shen, D.L. Chen**. Microstructural evolution and high-temperature oxidationmechanisms of a titanium aluminide based alloy. Acta Mater. 148(2018) 300-310.
[23] S.Q.Tang, S.J. Qu, A.H. Feng, C. Feng,J. Shen*, D.L. Chen**. Core-multishell globular oxidation in a new TiAlNbCralloy at high temperatures. Scientific Reports. 7 (2017)3483.
[24] Z.X.Zhang, S.J. Qu*, A.H. Feng, J. Shen,D.L. Chen*. Hot deformation behavior of Ti-6Al-4V alloy: Effect of initialmicrostructure. J. Alloys Compd.. 718 (2017) 170-181.
[25] Z.X.Zhang, S.J. Qu*, A.H. Feng, J. Shen.Achieving grain refinement and enhanced mechanical properties in Ti-6Al-4Valloy produced by multidirectional isothermal forging. Mater. Sci. Eng. A 692(2017) 127-138.
[26] 陶国强，祁广源，曲寿江*，沈军，多向等温锻造Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y合金高温压缩变形行为研究，钛工业进展，35(3) (2018) 11-15.
[27] 张胜雷，陈卓，曲寿江*，冯艾寒，陆煦，沈军，陈道伦，热处理对电子束选区熔化制备的Ti-6Al-4V合金组织与力学性能的影响，热加工工艺，47(10) (2018) 226-231.
[28] 汤守巧，曲寿江*，冯艾寒，冯聪，崔扣彪，沈军，TiAl基合金高温抗氧化研究进展，稀有金属，41(1) (2017) 81-93.
[29] 程祥霞，曲寿江*，冯艾寒，沈军，钛铝金属间化合物晶团与片层尺寸效应研究进展，稀有金属，40(4) (2016) 393-402.
[30] 朱慧萍，曲寿江*，祁广源，沈军，Ti2AlNb基合金轧板高温抗氧化性能研究，稀有金属，40(2) (2016) 104-109.
[31] S. J. Qu, A. H. Feng, L.Geng, Z. Y. Ma, J. C. Han. DSC analysis of liquid volume fraction and compressive behavior of thesemi-solid Si3N4w/Al-Si composite. Scripta Mater.. 56(11) (2007) 951-954.
[32] S.J. Qu, L. Geng, J.C. Han, SiCp/Alcomposites fabricated by modified squeeze casting technique, J.Mater. Sci. Technol. 23(5) (2007) 641-644
[33] S.J. Qu, J.C. Han, S.H. Meng. Compressive deformationbehavior of the ferritic oxide dispersion strengthened alloys at elevatedtemperatures, Asian Pacific Conferenceon Fracture and Strength ’06, Sanya, Hainan Island, China, 2006.11
[34] S.Chen, S.J. Qu, J. Liang, J.C. Han.Sintering and microstructure evolution of columnar nickel-based superalloysheets prepared by EB-PVD. J. Alloys Compd., 507(1) (2009)146-150.
（1）《金属成形原理》：博士研究生
（2）《材料科学基础》：本科生专业基础课
（3）《化学与工程材料学》：本科生专业基础课
文件上传中...
同济大学