[1] Multi-stage porous nickel-iron oxide electrode for highcurrent alkaline water electrolysis, Advanced Functional Materials, 2023,2214792.

[2] Power evolution of fuel cell stack driven by anodegas diffusion layer degradation, Applied Energy, 2022, 313: 118858.

[3] Investigation of the thermal responses under gaschannel and land inside proton exchange membrane fuel cell with assemblypressure, Applied Energy, 2022, 308: 118377.

[4] Durability degradation mechanism and consistencyanalysis for proton exchange membrane fuel cell stack, Applied Energy, 2022,314: 119020.

[5] Over-potential tailored thin and dense lithium carbonategrowth in solid electrolyte interphase for advanced lithium ion batteries, AdvancedEnergy Materials, 2022, 12(15): 2103402.

[6] Enhanced mass transfer and proton conduction ofcathode catalyst layer for proton exchange membrane fuel cell through fillingpolyhedral oligomeric silsesquioxane, Journal of Power Sources, 2021, 487:229413.

[7] Failure behavior of gas diffusion layer in protonexchange membrane fuel cells, Journal of Power Sources, 2021, 515: 230655.

[8] Failure of cathode gas diffusion layer in 1 kW fuelcell stack under new European driving cycle, Applied Energy, 2021, 303: 117688.

[9] Research progress of heat transfer inside protonexchange membrane fuel cells, Journal of Power Sources, 2021, 492: 229613.

[10] Graph theory model and mechanism analysis of carbonfiber paper conductivity in fuel cell based on physical structure, Journal ofPower Sources, 2021, 491: 229546.

[11] Numerical analysis of static and dynamic heat transferbehaviors inside proton exchange membrane fuel cell, Journal of Power Sources,2021, 488: 229419.

[12] A novel approach based on semi-empirical model fordegradation prediction of fuel cells, Journal of Power Sources, 2021, 488:229435.

[13] Deep learning based prognostic framework towardsproton exchange membrane fuel cell for automotive application, Applied Energy,2021, 281: 115937.

[14] Pre-lithiation strategies for next‐generation practical lithium‐ion batteries, Advanced Science,2021, 8(12): 2005031.

[15] The controllable design of catalyst inks to enhancePEMFC performance: A review, Electrochemical Energy Reviews, 2021, 4(1):67-100.

[16] Metallically conductive TiB2 as a multi-functionalseparator modifier for improved lithium sulfur batteries, Journal of PowerSources, 2020, 448: 227336.

[17] Stainless steel bipolar plates for proton exchangemembrane fuel cells: Materials, flow channel design and forming processes, Journalof Power Sources, 2020, 451: 227783.

[18] Surface modification of Li-rich Mn-based layeredoxide cathodes: challenges, materials, methods, and characterization, AdvancedEnergy Materials, 2020, 10(41): 2002506.

[19] Target-oriented electrode constructions towardultra-fast and ultra-stable all-graphene lithium-ion capacitors, Energy StorageMaterials, 2019, 23: 409-417.

[20] A universal matching approach for high power-densityand high cycling-stability lithium ion capacitor, Journal of Power Sources,2019, 441: 227211.

[21] From rotating disk electrode to single cell:exploration of PtNi/C octahedral nanocrystal as practical proton exchangemembrane fuel cell cathode catalyst, Journal of Power Sources, 2018, 406:118-127.

[22] Electrode materials, electrolytes, and challengesin nonaqueous lithium-ion capacitors, Advanced Materials, 2018, 30(17): 1705670.

[23] Activated carbon from biomass transfer for high-energydensity Lithium-ion supercapacitors, Advanced Energy Materials, 2016, 6(18):1600802.

[24] Nitrogen-doped activated carbon for a high energyhybrid supercapacitor, Energy & Environmental Science, 2016, 9(1): 102-106.

[25] Highly active carbon-supported Pt nanoparticlesmodified and dealloyed with Co for the oxygen reduction reaction, Journal ofPower Sources, 2014, 270: 201-207.